You install the small doorbell camera onto the doorframe and connect the wires. As soon as a visitor rings your doorbell, the picture will get displayed on the home monitor. This way you see who is at the door before you open it (or pretend you’re not at home). To speak to the caller, you simply press on the speech button. If you have also installed an electric door opener, you can open the door with the help of the monitor. If you have installed more monitors (optionally available) at home (maximum 3 extra), then you can also talk among each other (intercom).
The RF interface is an ALL HOUSE CODE receiver of RF signals from X10 remotes. It receives the RF signal from any X10 / Xanura commands and transfer it to the existing power line in your home.
Turn your PC into a comprehensive X10/A10 tester and programmer. The Interface Unit plugs into both a power outlet and into a USB port of your PC. Then start up the provided software (Windows compatible) and measure a plethora of information. By installing the software on a laptop, you have your very own elite mobile X10 test kit.
Micromodule with built-in relay with two contacts for connecting a 230V motor. Operate your electric sun blinds, roll down shutters, etc. remotely and/or locally.
This TG9700 Voice Dialer Security System protects your family and your home against intruders. On top of that the TG9700 can control lights and appliances throughout your house, using the existing mains wires.
This Voice Dialler Security System protects your family and your home against intruders. On top of that the SC4000 can control lights and appliances throughout your house, using the existing electrical wires
A combined multiplexer and digital video recorder that delivers quality image reproduction at a touch of button. It will accept up to 4 video inputs and its incorporated Ethernet capability converts the unit so it can be accessed (with password protection) via the Internet by a standard web browser.
Arm or disarm the security system, control lights or appliances or trigger the alarm from anywhere inside or outside your house — in the backyard or from your car.
The MS8000 is an all-in-1 mini-security system that Includes a security console and key chain remote. The unit can be armed or disarmed via a 4 digit pin on the console or through the remote control's arm/disarm buttons.
THIS UNIT IS NOT FOR SALE IN AUSTRALIA AND NEW ZEALAND
The DS10 Door/Window Sensor works with the X10 security system to detect when a door or window is opened. The sensor sends a wireless radio frequency signal to the main console. When the system is armed, the alarm is tripped when a door or window is opened. When the system is not armed, the console chimes when a door or window is opened.
The MS90 indoor motion detector works with our SG9400 and TG9700 X10 security systems to protect areas with more than one entry point, such as hallways and stairways.
The DS90 Door/Window Sensor works with our SG9400 and TG9700 X10 security systems to detect when a door or window is opened. The sensor sends a wireless radio frequency signal to the main console. When the system is armed, the alarm is tripped when a door or window is opened. When the system is not armed, the console chimes when a door or window is opened.
Grand X-Guard PC-based surveillance system allows you to connect up to 4, 9, or 16 video signals and display or record on your PC through TCP/IP, IPX (Internet/Intranet) and modem communication protocols. The system supports Windows 2000 and Windows XP. The system includes motion detection technology and Microsoft Video Compression, thus users can record the moving objects and not waste storage space. The compression rate, up to 300:1, can save time and costs of continuous recording unlike traditional surveillance systems.
WHOME the trusted supplier of home automation for over 10 years in Australia and Asia.
Supplier of complete range X-10, A10 hom automation range of products
Purchase the entire range of Home automation products plus HAL, WGL and much more from WHOME.