The EIRVC3 is an extra receiver for the Video Control 3. By using more receivers, your audio/visual devices can be controlled from more than one room. The receivers are connected to the antenna connection of the TVs in different rooms in the house.
The GigaView 745 sends an Audio/Video signal without any loss of the original quality. Using energy efficient power adapters and transmission technology, the precise amount of power to guarantee a stable connection is used.
The MegaView 51 allows you to stream and operate your Media Centre PC or set-top box remotely. Wired Audio/Video transmission as far as 300 metres using CAT5e/CAT6 cabling, includes an infrared return channel.
The MegaView 61 allows you to watch your HD Content on your TV remotely. Full HD 1080p HDMI Audio/Video transmission as far as 60 metres using CAT5e/CAT6 cabling, includes an infrared return channel.
With the GigaVideo 580, you can watch and operate all the channels of an Audio/Video source through walls & ceilings. The GigaVideo 580 includes a built-in infrared return RF antenna.
With the GigaVideo 570, you can watch and operate all the channels of two Audio/Video sources through walls & ceilings. Using the 5.8 GHz frequency, the GigaVideo 570 avoids interferance from microwave ovens & wireless networks.
The GigaControl 450 allows you to operate an unlimited amount of Audio/Video devices (within the IR Blaster line-of-sight) located in another room wirelessly with a range of up to 25 metres. Multiple sets can be used within the same environment.
ESPB power boards save energy around the home by cutting down ‘standby power’ use and protect from harmful power surges. They are equipped with ‘master’, ‘slave’ and ‘constant’ power outlets.
The IRIX35 is a receiver that converts IR (Infrared) signals into A10 commands and sends them over the lighting circuit. Up to 16 addresses can be controlled with one IR interface. NEC IR protocol compatible.
The RFIX35 is a receiver that converts RF (Radio frequency) signals into A10 commands and sends them over the lighting circuit. Up to 256 addresses can be controlled and 8 remote controls can be assigned to one RF interface.
The SAX35 is a potential free actuator/interface in a surface-mounted housing. The SAX35 can be used to switch appliances of other manufacturers using an input contact (max. 5A, 30 V A.C./D.C.), i.e. doorbell, electronic lock or heating system.
The ZAX12 is a sun blind actuator with interface equipped with 230 V inputs. The ZAX12 can be used for easy automation of electrically operated sun blinds, roll-down shutters, curtains and screens based on 230 V motors.
An affordable touch screen controller for your Home Automation, allowing lights and appliances to be turned on/off/dimmed at the touch of the screen. No wiring required - the unit mounts into your wall and transmits its commands to an X10 Transceiver.
A micromodule with a built-in two contact relay for connecting a 230V motor (max. 2.5A). Operate your electric sun blinds, roll down shutters and home theater screens both remotely and locally.
The DAIX12 is a dimming actuator equipped with one 230V input suitable for incadescent lamps & halogen lighting at 230V and low voltage halogen lighting at loads between 25 - 250W. The DAIX12 replaces DAIX10 and DAX10.
The SAIX12 is a switch actuator equipped with two 230V inputs suitable for resistive, capacitive and inductive loads up to 16A. Allows remote and/or on-site operation of lighting and equipment.
Operate your Audio/Video equipment and X10 modules throughout the house using the most user-friendly remote control. Choose a channel using well known network logos, you no longer need to remember which channels your favourite networks are on.
WHOME, the trusted supplier of automation products in Australasia for over 10 years.
Supplier of complete range of X10 & A10 home automation.
