Just plug an appliance module into any standard 240V outlet, then plug the appliance you want to control into the module. Set the appliance modules X10 address with the two dials on the front of the module and you're done...It’s that easy!
The AD10 DIN switch is a receiver module designed to switch hard–wired circuits.The AD10 enables automation control of your fixed on/off loads. It can also be switched manually by wiring a continuous or momentary switch to the input terminals.
The SAIX12 is a switch actuator equipped with two 230V inputs suitable for resistive, capacitive and inductive loads up to 16A. Allows remote and/or on-site operation of lighting and equipment.
The unit receives an X10 code and responds by continuous or momentary contact closure. Suitable for a wide range of devices including audio/video equipment, garage door openers, security systems, sprinklers, telephones and thermostats.
Flying lead connection block with switch function. This module has the same technical specifications as the AM12 plug-in module, but the AM12W is equipped with flying leads. The module can be installed directly into lighting fixtures.
The AW10 is an X10 Receiver which can switch 16A loads. This product design is European inspired, but can also be activated by an external momentary action switch connected to the switch.
A micromodule with a built-in two contact relay for connecting a 230V motor (max. 2.5A). Operate your electric sun blinds, roll down shutters and home theater screens both remotely and locally.
A wall mounted motor drive switch that can be used to operate curtains, sunshades and shutters.Works while you’re in the house, or when you’re absent — to make your house appear lived in.
The AW12 allows you to automate any fixed appliance and keep your own switch. The AW12 Micromodule can be mounted behind any standard wall switch, even most designer switches.
WHOME, the trusted supplier of automation products in Australasia for over 10 years.
Supplier of complete range of X10 & A10 home automation.
