|
HOME AUTOMATION > X10 TRANSMITTER MODULE > Wired Transmitters & Swtches
| |
X10 RF Wall Switch Controller SS13 (AU$55.00) |
|
| |
|
|
| |
|
|
| |
Features
- New slim elegant design
- Lets you control three X10 modules in your home with ON /OFF / BRIGHT / DIM
- Sends wireless RF signals to the transceiver module TM13, CM15 Pro or IR7243.
- Compatible with the full range of X10 home automation products. Also known as HA112
Description
The slimline Marmitek wireless wall switch (SS13E) lets you control three modules from any where in your home. The SS13E is normally used with the TM13 transceiver which passes through all codes from the wireless wall switch onto the powerline to control X10 modules. You can also use the wireless wall switch with any X10 security system instead of the TM13. Also
Typical Applications
- Use the wireless wall switch anywhere you want to control a device that does not have a wall switch
- Place one on the wall near your bedside
- Place one near your entrance
- Use them with the universal computer interface CM15 Pro to provide "Virtual Wiring" (macros)
- Control all your table lamps in the living room from one location
Technical Details
- Dimentions: H 115mm, W 70mm, D Approx 8mm
- Batteries: 1CR 2032,3 V lithium
- RF frequency: 433.92 MHz
- Radiated output: < 1mW
- RF operating range: 30 m (open field)
- Approvals: ETS 300220,300683
- CE Mark, R&TTE
- Ambient temperature:
- 10°C to + 50°C (operation)
- 20°C to + 70°C (storage)
Manual
Brochure
|
|
| |
|
|
| |
Back |
|
WHOME the trusted supplier of home automation for over 10 years in Australia and Asia.
Supplier of complete range X-10, A10 hom automation range of products
Purchase the entire range of Home automation products plus HAL, WGL and much more from WHOME.
|
