Do you have 3-phase power? If so, and you wish to have X10 home control modules installed on different phases, then the CR244 is required to allow the signals to pass through to all phases. As well as coupling the phases, the CR244 will add to the reliability of your system as the signals are re-transmitted at the higher A10 signal strength (fully compatible with your X10 products).
Features:
- Repeats signals from micro-modules as well as standard A10/X10 transmitters.
- Status LED's on cover.
- Can also be used as signal repeater in a single phase installation.
Applications
- Use micro-mdules in a 3-phase installation.
- Signal amplification of X10 home control signals on all 3 phases.
The CR244 should be installed behind a dedicated 3-phase master switch of a 400V power group (e.g. cooking or heating group). When earth leakage switches are installed, the CR244 should be installed before the earth leakage switches to prevent the unwanted trigger of these devices. When you use a 3-phase earth leakage switch with one neutral connection, you will be able to connect the CR244 behind it.
