| |
CLEARANCE
| |
Motion Sensor interface Transmitter (micro) AIX12 AU$99.00) |
|
| |
|
|
| |
|
|
| |
The AIX12 is an A-10 Micro Module Transmitter that is mounted, for example, behind a standard mains 240V a.c. PIR motion detector or light sensor. When the input to the AIX12 is live, it transmits an X-10 signal to any X-10/A-10 Receiver or Interface, which could then automatically switch lighting points (or appliances) and/or to trigger scenarios stored in a Programmable Interface.
Characteristics Operates when connected to, amongst other units, standard 240V movement detectors or light sensors. Sends ON/OFF commands
Operation The output connector of, for instance, a 240V movement detector or light sensor is connected to the input connector of the AIX12. Signals from the light sensor or movement detector activate the AIX12, which in turn sends an X-10 signal. Macros and scenarios stored in Programmable Interfaces can also be triggered by the AIX12.
Installation instructions Active and neutral wires are required to be connected to the AIX12.
Eaton A10 product installation guide
Whome Manual
AIX12 Manual
|
|
| |
|
|
| |
Back |
|
WHOME the trusted supplier of home automation for over 10 years in Australia and Asia.
Supplier of complete range X-10, A10 hom automation range of products
WHOME is the exclusive supplier of MARMITEK home automation. X-10 audio video, wireless and wired products in Australasia.
WHOME is the exclusive supplier of XANURA A10 home automation in Australasia
WHOME is the exclusive retailer of CM Technology products in Australasia
Purchase the entire range of Home automation products plus HAL, WGL and much more from WHOME.
|
|