The Computer Interface can also control any of our other X10/A10 Receivers. With the X10 programmable Computer Interface, you can program timed schedules for your lights and appliances and create X-10 macros. A macro involves a series of instructions being followed, such as: the stair lights turning on after the lounge room lights are turned off, the downstairs lights turning off 10 minutes later, the bedroom lights dimming by 50% at the same time, and all lights switching off after a further 30 minutes. The macros can be downloaded to the memory on the Computer Interface so that your instructions are followed even when your computer is turned off.

Sunset/Sunrise feature enables you to tell your computer where you live. It can then turn your lights on or off in response to this setting, changing throughout the year

• The Lifestyle feature will record what you do for a period of time and then replay it when you’re away, thus giving your home a lived-in look
• With the Lamp Receiver Module and Appliance Receiver Module (included in kit), you can start automating your home immediately. Your system can be expanded by adding more modules and switches as required
• The built–in memory guarantees that scheduled events will resume automatically after a power failure

Just plug the computer module into your 9-pin serial port, load the software, and watch your home come alive. The computer unit can address all 256 X10 codes so, you can control up to 256 lights and appliances in your whole home.

The Lamp Module enables you to switch and dim any incandescent lamp up to 300W. The Appliance Module enables you to operate any appliance up to 10 Amps.

WHAT DO YOU GET:

• One Computer Module (CM11)
• Two Lamp Modules (LM12)
• Two Appliance Modules (AM12)
• One Transceiver Module (TM13)
• One PowerMid XL (PMXL)
• One Absolute Beginner's Guide to Automation Book
• One 8-in-1 learning remote control (CV350)
• ONE serial cable for connection to PC
• One set of manual
• One CD containing operating software